Waste Oil Refining Plant with Plastic Oil,Tire Oil Desulfurization and Declorization

Product Description:

• Raw material can be processed: Waste engine oil, Tyre oil, Plastic oil, Bunker oil
• The end product can be got: Diesel 
• Daily process capacity : 1-100Tons/day
• Working process: catalyst, distillation, cooling, further-treatment, desulfurization system
  
  

Feasibility Of Used Motor Oil Cracking

• YANGJIANG uses two ways to manage the spent lube oil, the first is to recycle it into lube base oil, and another method is to crack it in to fuel. The same technology however that distills motor oil from crude oil is essentially the same technology that distills used oil into diesel fuel. The process to re-refine used motor oil is easier than refining crude oil.
• During processing, gasoline and diesel could be obtained through different distillation temperature ranges. 50-160℃ is the gasoline fraction range, and 160-410℃ is the diesel fraction range. After cracking and cooling, about 2-5% of liquid is gasoline. Approx 85-90% liquid is similar to diesel and able to meet the specification of -15# diesel.
• They’re able to be used as industrial or civil-use fuel, even power-driven fuel. Motor oil is from a fraction after diesel in the oil refining industry, they belong to the same petroleum family having different molecular weight, it is very feasible to produce diesel.

 

How to Crack Used Motor Into Diesel Fuel?

• Oil can be used in many different products, and this is because of its composition of many different hydrocarbons of different sizes, which are individually useful in different ways due to their different properties. The purpose of a refinery is to separate and purify these different components. Most refinery products can be grouped into three classes: Light distillates (liquefied petroleum gas, naphtha, and gasoline), middle distillates (kerosene and diesel), and heavy distillates (fuel oil, lubricating oil, waxes, and tar). While all of these products are familiar to consumers, some of them may have gained fame under their refined forms.
• Cracking is a petroleum refining process in which heavy-molecular weight hydrocarbons are broken up into light hydrocarbon molecules by the application of heat and pressure, with or without the use of catalysts, to derive a variety of fuel products. Cracking is one of the principal ways in which used oil is converted into useful fuels such as motor gasoline, diesel fuel and home heating oil.
• Cracking breaks carbon-carbon bonds to turn heavier hydrocarbons into lighter ones. This can occur thermally (as occurs during the petroleum formation process beneath the earth) or through the action of a catalyst.

 

After distillation, the sulfur content is around 1000ppm, we can add a desulfuration device to reduce the sulfur to 200-500ppm, you also can choose our solvent extraction machine to reduce the sulfur to 80-100ppm.

 

Advantages of Waste Oil Refining Plant:

• High recovery rate: 87%-95%, 3%-5% gasoline, and 85%-90%diesel
• Cooling system: We cool the gasoline oil and diesel oil separately be sure to collect pure diesel oil
• Self-Developed Chemical: we developed special chemicals, not can selectively processed harmful substances, but also the most important is to delay waste oil cracking into diesel under high temperature and reduce the cooking, greatly improve the recovery rate.
• No pollution: There is a degasification plant to dispose of the waste gas, then the gas will be collected and as fuel for the burner, without any pollution.
• Efficient heating system: no need for another heating source like heat transfer oil, don’t need to buy a boiler for heating exchange. It can heat the waste oil up to 330 ℃ under vacuum faster than other systems and greatly cut down your budget at the same time.
• The heat conversion rate is above 95%.

 

Our High-efficiency Heating Device combines existing electromagnetic heating, infrared heating and heat conduction heating, both the Electromagnetic heating layer and infrared heating layer are set outside the metal layer of the heated object. On the one hand, the alternating magnetic field of electromagnetic waves is used to heat the metal object, on the other hand, compound heating or heated objects in the metal layer is carried out by means of infrared thermal radiation and heat conduction produced by electromagnetic heating and infrared heating.

 

Parameter of Cracked Diesel Fuel:

Item	Test standard	result	Standard value
Density(15℃)	ASTM D1298	0.84    kg/l	----            kg/l
kinematic viscosity(40℃)	ASTM D445	3.36    cst	1.6-5.8         cst
Flash point(closed cup)	ASTM D93	60      ℃	≥55            ℃
Pour point	ASTM D97	-19      ℃	≤ 0             ℃
Distillation temperature
10% point	ASTM D86	204      ℃	-----            ℃
50%point		289      ℃	≤300           ℃
90% point		344      ℃	≤355           ℃
95% point		359      ℃	≤365           ℃
Cetane index	ASTM D976	54.42	≥45
Water content	ASTM D95	Trace     %vol	≤Trace     %vol
Sulfur content	ASTM D1226	0.151      %wt	≤0.2        %wt

 

 

YANGJIANG Machine Manufacture Co., Ltd has unique technology and rich experience in the waste oil recycling industry, the company constantly seeks development, extensively absorbs world's advanced oil purification technology, and is committed to research and development in the field of oil treatment. If you have any requirements and questions about the oil refinery machine, please feel free to contact us.