Select a Country or Region

waste oil recycling plant
waste oil recycling tank
waste oil recycling machine
waste oil recycling tank
recycled waste oil
waste oil recycling plant
waste oil recycling tank
waste oil recycling machine
waste oil recycling tank
recycled waste oil

YJ-TY Waste Oil Recycling Plant

Waste oil recycling plant is widely used regenerate waste oil, waste industrial lubricant oil, waste hydraulic oil, waste diesel and waste gasoline, etc. It is applied with the vacuum distillation technology, which can renew all the waste oil into based oil, with features of low cost, high recovery up to 85%, environmental and energy-saving. The waste lubricant oil recycling is not only renewed the waste oil, but also reduce the pollutants. It is the first option for waste oil recycling enterprises.

Share to

Waste Oil Recycling Plant Description:

  • Our YJ-TY Series Waste Oil Recycling Plant is to recycle used engine oil as the light yellow base oil, the color stand is formed 1-1.5.flash point is more than180℃. not only remove the water impurities, but also remove carbon, heavy metal, oxides as well as bad substance as colloid and bitumen, the recycled base oil we get from the machine is like SN150, SN300, SN350, SN500.
  • This equipment adopts vacuum distillation technology, physicochemical actions to polymerize, passivate, absorb and eliminate impurities and harmful contamination. We research a new chemical alkaline complex catalyst, which can restore and regenerate the waste oil to clean oil, save the component of the oil.
  • Vacuum distillation is a method of distillation whereby the pressure above the liquid mixture to be distilled is reduced to less than its vapor pressure (usually less than atmospheric pressure) causing evaporation of the most volatile liquid (those with the lowest boiling points). This distillation method works on the principle that boiling occurs when the vapor pressure of a liquid exceeds the ambient pressure.
  • YJ-TY waste engine oil distillation machine is used to define different kinds of waste engine oil, transfomer oil, industrial lube oil, etc. to clean base oil. Yangjiang has more than 10 years of rich experience for designing and installing the machine. During the past ten years, we have been constantly updating and adjusting our equipment. Up to now, our equipment has been very perfect, with mature after-sales service, provide free installation and commissioning.

 

YJ-TY Waste Oil Recycling Plant

 

Features of waste oil recycling plant:

  • All our machine is designed according to times and year experiments, and we have cooperation refinery in China too.
  • This machine is suitable for all kinds of waste industrial oil.
  • Efficient heating systems, be used to heat by coal, gas, wood, diesel, electricity, etc.
  • We special design with a heating chamber which heats used oil by hot air but not fire flame directly, no need thermal oil boiler to make a heating exchange, it is not only can save budget but also can rise waste oil temperature to 350℃ faster under high vacuum.
  • efficient vacuum system, the highest vacuum is a limited vacuum, this can make sure we distilled all clean oil as much as we can
  • Good quality recycled base oil, lube oil can be reused directly.
  • The recovery rate is as much as 85% .
  • No bad smell, all gas can be a draw to the heating burner.
  • Low chemical cost, only 30usd for recycling one ton used oil.

 

Flow Chart:

Flow Chart of YJ-TY Waste Oil Recycling Plant

 

The working process for Waste Oil Recycling Plant to recycle waste oil in a batch process for capacity 0.5-20 Ton, the 20-100 Ton is a continuous running process.

 

The Recovery rate of oil recycling plant:

  1. Light Base Oil: 43%-45%
  2. Heavy Base Oil: 45%-48%
  3. Diesel Oil: 5%-7%
  4. Residual: 6%-7%
  5. Water: 1%-2%

 

What's the base oil? 

The biggest part of a lubricant is composed of base oils while the remaining part is oil additives which help to protect your engine against wear and corrosion and keep it clean.70% of a lubricant is composed of base oils while the remaining 30% are oil additives which help to keep your engine cool, clean, and corrosion-free.

 

so the base oil from our machine, can be as lube oil for the lower engine, such as agriculture machines, tricycles, etc. you can add oil additives(like viscosity index improver, oxidation inhibitors, dispersants, anti-wear, etc.) to create hydraulic oil, gear oil or engine oil.

 

After-sales Service:

  1. Support Engineer overseas service, on-site installation for 20-40 days, debugging and technical training offered by strictly trained technology application engineers.
  2. The warranty period is 12 months from the commissioning acceptance date.
  3. When the warranty period is over, we provide lifelong maintenance and technical service.

 

Warmly welcome to contact us to know more about YANGJIANG's oil recycling plant and visit our factory at any time. Please feel free to let us know if there's any question in Business.

 

installation details of waste oil recycling plant