Waste engine oil can be recycled for reuse as lubricants. Waste engine oil becomes contaminated over time and through heavy use. Contaminants such as dirt, chemicals and water can get in and degrade the oil. Waste oil recycling systems help industry recondition oil for reuse in factories and machines. This saves industrial customers from having to buy new oil. Some industries use cascading lubrication, where spent high-quality motor oils are used reconditioned and used in applications that require lower quality oils. This can go through several steps before oil loses its usability. Car oil can be collected and recycled to produce reconditioned oil. That oil is cheaper than new synthetic oil and can provide similar protection for engines.
Waste oil, should not be thrown away, oil doesn't wear out; it just gets dirty. can be cleaned, re-refined and it can be recycled, again and again, can be recovered and re-used, without posing a threat to humans or the environment. Waste engine oil recycling plant can recycle waste engine oil to yellow base oil then use it back to machine and engine again.
YJ-TY waste oil distillation machine is widely used regenerate waste oil, waste industrial lubricant oil, waste hydraulic oil, waste diesel and waste gasoline, etc. It is applied with the
vacuum distillation technology, which can renew all the waste oil into based oil, with features of low cost, high recovery up to 85%, environmental and energy-saving. The waste lubricant oil recycling is not only renewed the waste oil, but also reduce the pollutants. It is the first option for waste oil recycling enterprises, and it will bring the greatest economic and social benefits to companies.
Specifications | Unit | YJ-TY-2 | YJ-TY-4 | YJ-TY-6 | YJ-TY-10 | YJ-TY-15 | YJ-TY-20 | YJ-TY-25 | YJ-TY-30 |
Handling capacity | Tons/batch | 2 | 4 | 6 | 10 | 15 | 20 | 25 | 30 |
Base oil Recovery | % | 80-85% | |||||||
Working pressure | pa | ≤ 60 | |||||||
Temperature | ℃ | ≤ 350 | |||||||
Working Noise | dB (A) | 45 | 65 | 65 | 70 | 70 | 75 | 75 | 75 |
total power | kw | 45 | 56 | 61 | 98 | 110 | 120 | 150 | 175 |
Power Supply | V | Agreement | |||||||
Dimension | L | 15000 | 15000 | 15000 | 17000 | 23000 | 25000 | 30000 | 35000 |
W | 4000 | 5000 | 7000 | 9000 | 6000 | 8000 | 8000 | 10000 | |
MM | H | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 |
Weight | T | 11.4 | 14.2 | 17 | 21 | 28 | 32 | 35 | 40 |
Cooling water | M3 | 30 | 40 | 45 | 50 | 65 | 70 | 80 | 100 |
Operating area | M2 | 140 | 170 | 220 | 300 | 400 | 500 | 600 | 800 |
Delivery time | DAYS | 60 | 60 | 60 | 70 | 80 | 90 | 90 | 90 |
After chemical treatment, the waste motor oil is heated by a distillation reactor, to control the oil temperature within 350 degrees through the heating furnace. As the temperature of the oil rises to around 55℃, the first cut off gasoline starts to release from the waste oil. As the temperature of the oil rises to around 110℃ - 220℃, the second cut of diesel are released from the batch. As the light oil cut(diesel oil) tends to finish, there is a temperature rise indicating the completion of light oil. Base Oil is the main product and its distillation starts at around 220℃ and continues up to 350℃. The light base oil is distilled out around 220°C-300°C, and Most of the heavy base oil distills out during 300℃ -350℃. At the end of the process, the kettle bottom temperature begins to rise to mark its completion. Finally, the process ends when the residual material in the kettle does not vaporize, even at a temperature of around 350℃. At this point, the heating in the distillation process is stopped and the process is essentially complete. Can pump oil residual out to use as bitumen and heavy fuel oil.
Component | Percentage(%) | Temperature(℃) |
water | 1.50% | 80-110degree Celsius |
Gasoline/diesel oil | 5%-7% | 110-220degree |
base oil | 85% | 220-350degree |
Residue | 5%-8% | Can be as fuel |
Based on project management, equipment design, procurement and rich modular manufacturing, testing, commissioning and after-sales service experience in oil processing, Chongqing Yangjiang Machinery is committed to providing customers with complete and efficient modular solutions to meet customer needs.
Welcome to contact us for more details (+86 133 9980 7550 WhatsApp / WeChat 24-H service)